- Smaller amount of dimming rage (Typically 70-90% range vs. 100% with incandescent)
- LED Bulbs may not shut off at lowest dim setting: this is caused by the dimmer thinking the bulb is completely off due to the low amount of wattage an LED consumes.
- On dimming systems based on X10 or Power Line Carrier (PLC) control technology, LEDs may flicker when modules are communicating due to the small fluctuations in power on the line.
It is suggested that you test your current dimmers to see if they work with the LED bulbs you have purchased, chances are they will likely work fine. However, if you experience any of the above issues with your current dimming control, we suggest the Lutron CL series of dimmers. These dimmers were the first to be designed with LED light bulbs in mind and offer a trim adjustment switch that will allow for full and accurate control of dimming range.
Share this post